Echo SRM-260U - Manual (Page 11)

G
RASS
T
RIMMER
/B
RUSH
C
UTTER
O
PERATOR
'
S
M
ANUAL
11
S
PECIFICATIONS
MODEL ----------------------------------------------------- SRM-260U
Length ------------------------------------------------------- 1795 mm (70.7 in.)
Width -------------------------------------------------------- 711 mm (28.0 in.)
Height ------------------------------------------------------- 478.5 mm (18.84 in.)
Weight (dry) w/Cutter Head ------------------------------ 6.5 kg (14.3 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------------- 34.0 mm (1.34 in.)
Stroke -------------------------------------------------------- 28.0 mm (1.10 in.)
Displacement ----------------------------------------------- 25.4 cc (1.55 cu. in.)
Exhaust ------------------------------------------------------ Spark Arrestor Muffler
Carburetor -------------------------------------------------- Walbro WYJ w/purge pump
Ignition System* ------------------------------------------- Flywheel magneto, transistor control ignition type
Spark Plug -------------------------------------------------- NGK BPMR-8Y (Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50:1 ECHO High Performance, two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------------------ 50:1 ECHO High Performance, two-stroke air cooled engine oil
Fuel Tank Capacity ---------------------------------------- 0.58 lit. (19.6 US fl. oz.)
Starter System ---------------------------------------------- Automatic Rewind Starter
Clutch ------------------------------------------------------- Centrifugal Type
Vibration Isolated System --------------------------------- Rubber cushion on engine mount (heavy duty). Rubber grip on
front handle.
Operating Rod ---------------------------------------------- 25.0 mm aluminum Tube
Drive Shaft -------------------------------------------------- 6.35 mm (1/4 in.) flexible shaft
Gear Case Ratio -------------------------------------------- 1:1.4 Reduction
Rotating Direction ----------------------------------------- Counter Clockwise; viewed from top
Cutter Head ------------------------------------------------- Nylon line head (2-line) with .095 Crossfire™ Line capacity
6m (20 ft.)
Handle ------------------------------------------------------- U-Handle
Shoulder Harness ------------------------------------------ Standard
Idle Speed --------------------------------------------------- 2400 - 3200 RPM
Wide Open Throttle Speed (W.O.T.)
with Nylon Line Head ------------------------------------- 8500 - 9500 RPM
Wide Open Throttle Speed (W.O.T.)
with Blade -------------------------------------------------- 9000 - 11,500 RPM
* IMPORTANT This spark ignition system complies with Canadian ICES-002.