Echo SHC-210 - Manual (Page 25)

H
EDGE
C
LIPPER
O
PERATOR
'
S
M
ANUAL
25
S
PECIFICATIONS
MODEL ----------------------------------------------------- SHC-210
Length ------------------------------------------------------- 1790 mm (70.5 in.)
Width -------------------------------------------------------- 245 mm (9.65 in.)
Height ------------------------------------------------------- 270 mm (10.6 in.)
Weight (dry) ------------------------------------------------ 5.98 kg (13.2 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------------- 32.2 mm (1.27 in.)
Stroke -------------------------------------------------------- 26.0 mm (1.02in.)
Displacement ----------------------------------------------- 21.2 cc (1.29 cu. in.)
Exhaust ------------------------------------------------------ Spark Arrestor Muffler w/catalyst
Carburetor -------------------------------------------------- Zama RB Diaphragm w/Purge Pump
Ignition System -------------------------------------------- Flywheel Magneto, CDI (capacitor discharge ignition) with ESG
Spark Plug -------------------------------------------------- NGK BPM-8Y (Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------------------ Power Blend TM Premium Universal 2-Stroke Oil
Fuel Tank Capacity ---------------------------------------- 0.45 lit. (15.2 US fl. oz.)
Recoil Starter System -------------------------------------- Automatic Recoil Starter
Clutch ------------------------------------------------------- Centrifugal Type
Gear Case Ratio -------------------------------------------- 5.88:1
Cutter -------------------------------------------------------- Double Reciprocating Blade - Double Edge
Length ----------------------------------------------------- 490 mm (19.3 in.)
Pitch ------------------------------------------------------- 35 mm (1.4 in.)
Maximum Diameter Cut
Soft Material ---------------------------------------------- 25.4 mm (1 in.)
Woody Material ------------------------------------------ 13 mm (1/2 in.)
Idle Speed --------------------------------------------------- 2,750 - 3,250 RPM
Wide Open Throttle Speed ------------------------------- 9,500 - 11,500 RPM