eMachines E17T4W - Manual (Page 8)

Using Your eMachines Flat-panel Monitor www.emachines.com
4
3 Press the two release buttons on the back of the monitor’s original neck,
then slide the monitor base out of the neck.
4 Remove the screw from the neck hinge, then remove the neck from the
LCD panel.
5 Remove the four small screws from the back of the LCD panel. Do not
discard the four screws.
Release
button Release
button
Screw
Screw Screw
Screw Screw
8511810.book Page 4 Friday, November 17, 2006 10:00 AM