EverFocus EDSR 400F - Manual (Page 52)

E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
ƒ Please Note: Our recorders are developed for segment recording. One
segment or motion event can record to one sector on the hard drive.
Hard drives contain on average 256 sectors. Therefore recording on
motion only you will see the Record Light going on and off you are
not recording properly in motion. This will eat up your hard drive
space. To remedy this problem simply turn permanent recording to
the on position and select lowest recording speed to stay in record
mode continuously.
¾ To view the operating display (diagram 27), press the Display button.
Diagram 27
¾ To stop recording you must disable all the channels that have been enabled
for Motion Recording and Alarm recording menu also you must disable
Permanent Record.
ƒ Please Note: When the Hard Drive is full, the DVR will either stop
recording automatically or overwrite from the beginning of the hard drive.
This is all dependent on what was set in the record setting (see page 25).
47