EverFocus EDSR 400F - Manual (Page 26)

E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N
ƒ Please Note: Refer to Appendix C for more information about setting
up the alarm board.
¾ Duration: When any sensor alarm connected to the device is activated, the
device will immediately react with an alarm and display the warning
message. This entry is used to set the alarm duration from 1 to 99 seconds.
To change this, simply use the Jog Dial on the DVR. Press the Enter key to
make your selection.
21