Electrolux LAVAMAT 50550 - Manual (Page 42)

Setting up and connection instructions
42
Setting Up the Unit
3 Washing machines with curved panels are not suitable for substruc-
tures.
Transporting the Unit
• Do not place the washing machine on its front side or on its right side
(looking from the front). Otherwise the electrical components can get
wet.
• Never transport the unit without using the transport safeguard. Do
not remove the transport safeguard until you reach the installation
site. Transporting the unit without the transport safeguard can result
in damage to the unit.
• Never lift the unit by the open filling door or by its base.
• When transporting the unit with a sack trolley: Attach the sack trol-
ley only at the side.
Remove the Transport Safeguard
Attention! It is essential to re-
move the transport safeguard be-
fore putting the unit into
operation! Keep all parts of the
transport safeguard in a safe
place for possible later transport
(moving house).
0 1. Open both hose holders on the
rear of the unit and remove the
hoses and the mains cable.
2. Firmly pull both hose holders off
the unit.