Electrolux LAVAMAT 50550 - Manual (Page 31)

Instructions for use
31
The END (FIN/EINDE)
indicator flashes
8 times. The programme selector has
not clicked into place cor-
rectly.
First turn the programme se-
lector to OFF (ARRET/UIT),
then set the desired pro-
gramme to the exact posi-
tion.
The washing machine
vibrates when operat-
ing or is noisy.
The transit bolt/bars were
not removed.
Remove the transit bolts/bars
as described in the
Installation and Connection
instructions.
The height-adjustable screw
feet have not been set
correctly. Adjust the screw feet as de-
scribed in the Installation
and Connection instructions.
There is very little washing in
the drum (for example, only
one bathrobe).
Operation is not affected by
this.
Water could not be drained
completely before spinning,
because the outlet hose has
got a kink in it or the drain
pump is blocked.
Check the positioning of the
outlet hose and even out any
kinks if necessary or clean
the drain pump and remove
any foreign matter that
might be in the pump hous-
ing.
The main wash deter-
gent solution produces
too many suds.
Probably too much detergent
was used.
Follow the manufacturer's
instructions exactly, when
measuring out detergent.
Problem Possible Cause Remedy