Vivotek FE9380-HV 5MP Outdoor Network Fisheye Dome Camera with Night Vision - Manual (Page 257)

VIVOTEK
User's Manual - 257
streamcodec 0/7 Represent supported codec types of each
stream.
This contains a list of positive integers, split by
comma. Each one stands for a stream, and the
definition is as following:
Bit 0: Support MPEG4.
Bit 1: Support MJPEG
Bit 2: Support H.264
Bit 3: Support H.265
mode 0, 0/7 Indicate current video mode.
nmode 0/7 Indicate how many video modes supported by
this channel.
maxsize 0/7 The maximum resolution of all modes in this
channel, the unit is pixel.
nprivacymask 0, 0/7 Number of privacy mask per channel
nresolution 0/7 The maximum resolution options (listed in
"resolution") in current video mode.
resolution A list of
0/7 Resolution options in current video mode. These
options are the possible options for
"videoin_c_s_resolution".
The last one is the maximum resolution in
current mode.
maxresolution A list of 0/7 Represent supported maximum resolution of
each stream in current video mode.
* The element number is defined as
"capability_nmediastream".
maxframerate A list of 0/7 Indicate frame rate that the video source
outputs in current video mode.
One to one mapping to the resolution in
"resolution".
* The element number is defined as
"nresolution" in this group.
* This parameter may be changed when
"videoin_c_cmosfreq"=50 or
"videoin_c_modulation"=pal.
Ex: 30 fps is changed to 25 fps, 60 fps is
changed to 50 fps, and so on.