beautypg.com

Cd cassette synchro recording, Automatic recording volume level control, Stereo headphone jack – Emerson Radio PD6850 User Manual

Page 25

background image

2 4

CD CASSETTE SYNCHRO RECORDING

When recording from CD to cassette, the CD cassette synchro recording feature in

this unit allows you to start both the CD player and the cassette recorder with the

push of a single button.

1.) Open the CD door and place the CD to be recorded in the CD player as usual.

Close the CD door.

2.) Open the cassette compartment and insert a blank cassette tape.

3.) Press the FUNCTION button to select the CD mode.

4.) Press the cassette Record

key. The SYNC indicator appears in the display..

The cassette recorder and the CD player will

start simutaneously and all of the material on

your CD will be recorder directly onto the blank

cassette.

Note: If a CD is already playing and you press the cassette Record

key,,

the CD player will begin recording at that point automatically.

Automatic Recording Volume Level Control

This unit has an Automatic Level Control (ALC) circuit which controls the recording

volume level and prevents overloaded and distorted recordings. The VOLUME

and SURROUND controls have no effect on recording volume level. You may

change the control settings during the recording or even reduce the volume level

to “Minimum”. This will not effect the level of the recording.

STEREO HEADPHONE JACK

Connect a set of stereo headphones (not included) with a 3.5mm mini plug to the

Phones

jack (located at back cabinet) for private listening without disturbing

others. Before putting on the headphones reduce the VOLUME control to a low

level, then put the headphones on and gradually increase the VOLUME control to

a comfortable listening level. The built in speakers are automatically disconnected

when headphones are connected to the headphone jack.

PD6850_ib060203.p65

2/6/2003, 14:41

24