Emerson Radio PD6850 - Manual (Page 21)

2 0
7.) To begin programmed playback press the
PLAY/PAUSE button. The display will show
the first programmed track and playback will
begin on that track. The MEMORY Indicator
remains in the display.
After the last programmed track has played the player stops but the programmed
tracks remain in the memory. To play the programmed tracks again, press the
PROG/MEMORY button and then the PLAY/PAUSE button.
To cancel the programmed sequence from memory, press the STOP button at
programming mode or open the CD door.
Program Repeat Playback
You can use the Program and Repeat features together to continuously repeat a
programmed sequence of tracks. First, program the desired tracks according to
Steps 1 through 7 on the previous page. When
Programmed Playback begins press the MODE
button twice to activate the All Tracks Repeat
feature. The “ ALL” Indicator appears in LCD
display and all the tracks in your programmed
sequence will be repeated continuously.
To cancel Programmed Repeat Playback press the STOP button until both the
MEMORY and “ ALL” Indicators go ‘Off’.
PD6850_ib060203.p65 2/6/2003, 14:41 20