Emerson Radio PD6850 - Manual (Page 11)

1 0
LISTENING TO THE RADIO
1.) Press the POWER button on left top panel. The main display and the POWER
LED indicator turns “On”.
2.) If necessary, press the FUNCTION button on the right side panel to select the
Radio function. The display will show an AM or FM station frequency. To select
a different band, press the BAND button again.
3.) Tune to the desired frequency as follows:
• Manual Tuning
Repeatedly press the TUNING /
buttons on the top panel until the frequency
of the desired station appears on the display.
• Automatic Tuning
Press and hold the TUNING / buttons until the display begins to move,
then release the buttons. The tuner will search up or down the band for the
next strong station and stop on that station. Repeat this procedure until the
tuner stops on your desired station.
4.) Adjust the VOLUME and SURROUND controls as desired.
5.) If you tuned to an FM Stereo station the indicator will appear in the main
display. If the reception is noisy or weak, press
the MODE button (inside the cassette key
cover). The indicator will turn ‘OFF’. The
reception will normally improve although the
sound will no longer be in stereo.
6.) When you are finished listening, press the POWER button. The main display
and the POWER LED go ‘Off’.
kHz
PD6850_ib060203.p65 2/6/2003, 14:41 10