Epson RX-8581JE - Manual (Page 29)

RX - 8581 SA
/
JE
/
NB
Page - 26 MQ372-02
9. External Dimensions / Marking Layout
RX-8581 SA (SOP - 14 pin)
•
External dimensions
•
Recommended soldering
0.6
0.15
0 ° - 10 °
1.4
1.4
5.4
1.27
1.27 × 6 = 7.62
0.7
Unit : mm
10.1 ± 0.2
5.
0
7.4
±
0.
2
#14 #8
#7 #1
1.27 1.2
0.05
Min.
3.2 ± 0.1
0.35
R8581
E 1234A
∗ The crystal oscillator's metal case may be visible in the area (on top) indicated in broken lines ,
but this has no effect on the device's characteristics.
RX-8581 JE (VSOJ - 20 pin)
•
External dimensions
•
Recommended soldering
0.65 0.22
1.3 1.5 Max.
0.12 0.1
0 Min.
6.0
± 0.2
(0.75)
(0.75)
Unit : mm
1.5
3.8
1.5
0.65 × 9 = 5.85
0.3
0.35
0.65
5.4
7.0 ± 0.3
# 1
#20 #11
#10
R8581
E 1234A
∗
The crystal oscillator's metal case may be visible in the area (on front and top) indicated in broken lines ,
but this has no effect on the device's characteristics.
RX-8581 NB (SON - 22 pin)
•
External dimensions
•
Soldering pattern
1.3
± 0.1
0.125 0.1 Unit : mm
6.3 Max.
5.0
± 0.
2
4.
8
0.5 0.2
#1
#22 #14
#11
#14
(0.3
)
#11 #1
#22
0.
8
P 0.5 × 10 = 5.0
1.
4
0.5
5.25
0.25
0.7
0.75 0.25
0.8
0.7
4.
0 0.7
0.7
#1
#11
#22 #14
E 1234A
R8564
∗ 1) The crystal oscillator's metal case may be visible in the area (on front and top) indicated in broken lines
,
but this has no effect on the device's characteristics.
∗
2) Do not lay out signal patterns on component surfaces indicated by the shaded areas
in the soldering
diagram .