Electrolux EHP 601 K - Manual (Page 10)

10
Cleaning and care
Attention! Cleaners must not get onto the hot ce-
ramic glass surface! After cleaning all residues of
cleaners must be removed with sufficient clean
water, as they may be caustic when being rehea-
ted.
Never use aggressive or abrasive agents, such
as oven sprays, stain or rust removers, scouring
powder, or sponges with an abrasive effect.
Suitable cleaning materials are: clean cloth or
household paper, hot water with detergent, suita-
ble commercial cleaners and cleaning scrapers.
Cleaning scrapers and ceramic glass cleaners
are available from the expert trade and in markets
for building material.
Ceramic glass surface
.
Clean the ceramic glass surface after every use
when it is hand warm or cold. This will avoid spills
becoming burnt on.
.
Remove scale and water marks, fat spots and
metallic shimmering discoloration with a commer-
cial ceramic glass cleaner such as Vitroclen.
Light soilage
.
Wipe the ceramic glass surface with a damp cloth,
and a little washing up liquid.
.
Then rub dry with a clean cloth. No residues of
cleaner must be left on the surface.
.
Once a week, throroughly clean the entire cera-
mic glass surface with a commercial ceramic
glass cleaner such as “Vitroclen”. Always ensure
that the hob is dry after cleaning.
Stubborn soilage
.
To remove food that has boiled over or burnt on
spots, use a glass scraper.
.
Place the glass scraper at an angle to the ceramic
glass surface. Remove soiling by sliding the scra-
per.