Marantz NR1510 5.2-Channel Network A/V Receiver - Manual (Page 136)

o HDMI Control
You can link operations with devices connected to HDMI and
compatible with HDMI Control.
On: Use HDMI Control function.
Off
(Default):
Do not use HDMI Control function.
0
Please consult the operating instructions for each connected device to check
the settings.
0
Refer to “HDMI Control function” for more information about the HDMI Control
function. ( v p. 104)
NOTE
0 If the “HDMI Control” settings have been changed, always reset the power to
connected devices after the change.
o ARC
On the TV connected to the HDMI MONITOR connector, set whether
to receive sound from the TV via HDMI.
On: Use ARC function.
Off
(Default):
Do not use ARC function.
0
You can adjust the volume of this unit using the TV remote control.
0
If using this function, use a TV compatible with ARC (Audio Return Channel)
and enable the HDMI Control function of the TV.
0 When “HDMI Control” is set to “On”, the “ARC” settings automatically switch
“On”. ( v p. 136)
NOTE
0
If the “ARC” settings have been changed, always reset the power to
connected devices after the change.
0
Using an eARC function-compatible television enables audio playback from
the speaker connected to this unit, regardless of “ARC” settings in the menu.
Contents Connections Playback Settings Tips Appendix
136
Front panel Display Rear panel Remote Index