Ericsson LBI-39110 User Manual

Page 20

When a Flex Key is PC programmed, it is

locked, thus preventing the user from
re-programming its function.

Individual Call Notification

When an individual call is received the

caller's ID is stored and is displayed for a
programmable time period. After the display time
has expired, the last individual call received is

recallable by pressing the

button or entering

Special Call mode. The caller's ID is not saved if
the radio is turned off.

The user is alerted to the presence of

missed individual calls via one of two methods.
The default first method is for the radio to display
"C*" as the first two characters in the display. The
alternate method allows the user to PC program
an eight character alphanumeric such as "*MSG*".
In combination with these notification methods, the
personality can be set-up so that the radio beeps
until the user clears the call or toggles the
hookswitch.

Storing An Individual Call ID

This type of call is dynamically stored to the

call list by following the following steps:

Enter the desired individual call ID

then

followed by the

key.

Enter the two digit storage location for

the number (00 to 50). The new
individual call ID is now added to the
call list.

Using Special Call Lists

In the Allegra Duplex Portable, the

difference between a "Call List" and "Special Call
List" is that the Call List consists of user modifiable
phone numbers and radio LIDs. It operates
similarly to a pre-stored phone list in a cellular
phone. A "Special Call List" is PC programmable
and is not user modifiable.