Exido 246-024 - Manual (Page 15)

Your blender is equipped with a safety
switch, which automatically cuts off the
power to the motor if the blender goblet is
not correctly fitted.
NB!
- Do not leave the blender running for
more than 3 minutes at a time. Stop for
a few minutes and start again.
- Do not remove the blender goblet
while the motor is running.
- Always pour some liquid into the blen-
der goblet if you are using it to crush
ice.
- Please note that the blade may be-
come blunt and/or bent if you use the
blender for crushing ice. The blender
goblet may also become scratched.
- Your blender cannot:
- mash potatoes
- mince raw meat
- whisk egg whites
- knead dough
SUGGESTIONS FOR FOOD PREPARA-
TION USING YOUR BLENDER
Drinks
Your blender is ideal for mixing drinks.
Place the drink ingredients in the blender
goblet (at least 1⁄4 full). Please note that
you must leave enough room in the blender
goblet for foam to form.
sOUPs, sAUCEs, PUrÉEs
A blender is ideal for making soups, sauces
and purées. The more liquid there is in the
goblet the greater the quantity produced at
a time.
If you use “dry” foods, such as boiled
vegetables, fill to just cover the blade and
stop part way through blending to scrape
the food from the blades and sides using a
plastic spatula, before adding more ingre-
dients and continuing.
MAYOnnAisE
Place egg yolks, mustard and wine vinegar
in the blender. Start at the lowest speed
and blend for 5 seconds. While the blender
is going, pour in the oil very slowly and
carefully in a thin stream through the filling
hole in the lid.
Blend until the mayonnaise reaches the
right consistency.
BATTEr (FOr PAnCAkEs ETC)
First put the liquid ingredients into the
blender goblet, then the “dry” ingredi-
ents. Blend at speed 1 or 2 until the “dry”
ingredients have been assimilated into the
liquid.
NB!
To blend larger ingredients such as nut-
meg, choose the pulse function to break
them up into smaller pieces, and then set
the blender to speed 2 until a satisfactory
result is achieved.
CLEANING
Wipe the blender goblet and motor section
with a hot damp cloth, and then wipe again
using a dry cloth.
For more thorough cleaning: remove the
blender goblet from the motor section.
Wash the individual parts in hot soapy
water.
After drying, attach the goblet to the motor
section again.
nB! The blade is extremely sharp.
We do not recommend washing any of the
parts in a dishwasher
INFORMATION ON DISPOSAL AND
RECYCLING OF THIS PRODUCT
Please note that this Adexi product is
marked with this symbol:
This means that this product must not be
disposed of together with ordinary house-
hold waste, as electrical and electronic
waste must be disposed of separately.
15