Exido 246-024 User Manual

Page 14

To get the best out of your new blender,
please read these instructions carefully
before using it for the first time. We also
recommend that you save them in case you
need them at a later point to remind yourself
of the blender’s functions.

IMPORTANT SAFETY MEASURES
- Read the user instructions all the way

through.

- Use the appliance for its intended pur-

pose only.

- Never pull on the cord; to unplug from

the socket, grasp the plug firmly and
pull carefully.

- Keep the cord away from hot surfaces.
- Should the cord become damaged, it

must be replaced at a workshop spe-
cified by the manufacturer, as special
tools are required.

- Should the appliance itself become da-

maged, it must be taken to a specialist
for repair. If the appliance is subjected
to unauthorised repairs the guarantee
will become void.

- Keep an eye on any children in the

vicinity of the appliance when it is being
used. The appliance should be kept out
of the reach of children.

- For indoor use only.
-

The blender is not for commercial use.

WARNING: When mixing hot liquids/

foods excess pressure may build up

inside the blender, and this could make

the lid come off and the contents splash

out.

We therefore recommend that you

avoid mixing excessively hot foods and

that you only put very small quantities
of hot liquids or foods into the blender.

OVERVIEW OF FUNCTIONS:
1. Removable cap in lid
2. Lid with filling hole
3. Blender goblet
4. Motor section
5. Pulse function button
6. Speed selector

BEFORE USE:
Before using for the first time, take the
blender apart and wash the blender goblet,
lid and blade section in mild detergent and
dry them thoroughly. Do NOT immerse the
motor section in any form of liquid!

USE:
1. Ensure that the knob is at “Off”.
2. Fit the blender goblet onto the motor

section and turn it firmly clockwise.

3. Place the required ingredients carefully

in the blender goblet.

4. Carefully attach the lid, and plug the

blender in.

5. Start the blender by flipping the speed

selector to the required position.

“Lo”: Low speed

“Hi”: High speed

“Off”: Stop
The manual pulse function button can
be pressed for maximum speed in
shorter periods.

6. Once the ingredients have reached

the desired consistency, flip the speed
selector back to the “Off” position.
Do not remove the blender goblet from
the motor section until the blacde has
stopped rotating.