Electrolux 5212 BU - Manual (Page 62)

Place the heat deflector flush with the edge of
the worksurface, (see Fig. 15) with the cork
spacers upover (see Fig.16) and screw into
position using the screws supplied with the
appliance.
Failure to do this may cause damage to the
underside of the work surface.
Replace the plinth board.
Switch on the appliance and refer the user to
the operating instructions.
Fig.16
Fig.15
TOP OVEN
DOOR
HEAT SHIELD.
LEVEL WITH
FRONT EDGE OF
WORK TOP
WORK TOP
AEG5212 - 311435410
62