Emerson Radio iP105BK - Manual (Page 6)

5
Installing The Batteries
There are two battery compartments on the back cabinet. Remove the battery
compartment covers by pressing down on the ‘arrow’ marks and sliding the covers
downward in the direction of the arrows as shown.
Install 6 “C” batteries in the main compartment as shown. Place the battery ribbon
into the compartment before inserting the batteries to make removing the batteries
easier.
Install 2 “AAA” batteries in the back up battery compartment as shown in the above
illustration.
NOTE: If the back-up batteries are not installed, the clock, alarm, and tuner
memories will have to be reset after every power interruption.
We recommend that you always use a well-known brand of alkaline batteries for
longest life and best performance. Be sure to install the batteries correctly, according
to the polarity markings engraved on the cabinet. If the batteries are inserted
incorrectly the unit will not work.
(2 “AAA” Batteries)
(6 “C” Batteries)
iP105_052207.p65 22/5/2007, 11:37 5