Listening to the radio – Emerson Radio iP105BK User Manual

Page 16

Listening To The Radio

1.) Press the POWER

button to turn the power

‘On’. The display back lighting comes on and the

display appears as:

Press the BAND button to switch the radio

between FM and AM bands if necessary.

When listening to the FM band, raise the

telescoping FM rod antenna and extend it to its

full length.

2.) Tune to the desired station as follows:

• Automatic Tuning

Depress and hold the TUNING + / – buttons until the display begins to move,

then release the buttons. The display will move up or down and stop on the

next strong station. Repeat this procedure until the display stops on the

frequency of your desired station.

If it is an FM Stereo station the ((ST)) indicator

will appear in the display.

• Manual Tuning

Repeatedly press the TUNING + / – buttons to manually move the display up

or down to the exact frequency of your desired station.

NOTE: Use the Manual Tuning method to tune to weaker stations that

might be bypassed by the Automatic Tuning method.

3.) Press the VOLUME + / – buttons to adjust the

Volume to the desired level.

The Volume Level indicator appears in the display

as you adjust the volume level. The adjustment

range is from “V 01” to “V 30”.

iP105_052207.p65

22/5/2007, 11:37