Emerson Radio iP105BK User Manual

Page 13

1.) Press the TIME SET/MEMORY button once. “12:Hr” appears on the display

and the “12” flashes. This indicates that the display is set for the 12-Hour format

with AM/PM indicators.

This is the factory default setting. You also have the option of displaying the

time in 24-Hour format, also referred to as “Military Time”.

In the 24-Hour format midnight is displayed as “0:00”, “1:00 PM” is displayed

as “13:00”, “6:00 PM: is displayed as “18:00”, etc.

There are no AM or PM indicators in the 24-Hour format. To switch between the

12-Hour and 24-Hour formats if necessary, press either the

buttons while the “12” indicator is flashing.

NOTE: You must begin making adjustments within 5 seconds after pressing

the TIME SET/MEMORY button, while the display is flashing. If no

adjustments are made within 5 seconds the display stops flashing and

returns to the Time display.

2.) While the “12” indicator is flashing, press the

TIME SET/MEMORY button once more. The

hours and minutes display returns and the hour

digits flash.

3.) While the hour digits are flashing press either

the

buttons to move the

hour display back or forward to the correct hour.

Be sure to observe the AM/PM indicator to make

sure you have set the hour correctly.

iP105_052207.p65

22/5/2007, 11:37