Motorola Defy Satellite Link - Manual (Page 11)

motorola defy satellite link
11
Safety and certifi cation
• Do not disassemble, hit, throw, crush, puncture, or bend the device.
• Do not modify or attempt to insert foreign objects into the device, expose it to fi re, explosion or
other hazards.
• Only use the battery with a charger and cable that have been qualifi ed with the system. Use of an
unqualifi ed battery or charger may present a risk of fi re or explosion.
• Only authorized service providers can replace the battery.
• Always dispose of used batteries in accordance with local regulations.
• Do not tamper with the battery, misuse may result in a fi re, explosion or other hazards.
For those host devices that utilize a USB port as a charging source, the host device’s user manual shall
include a statement that the device shall only be connected to CTIA Certifi cation certifi ed adapters,
products that bear the USB-IF logo or products that have completed the USB-IF compliance program.
Operating temperature
Keep the ambient temperature between 0°C and 40°C while the device is being charged. Keep the
ambient temperature between -25°C to 55°C for using the device powered by a battery. Please wear
protective gloves while using it outside the range of 0°C to +45°C.
Viewing the E-label
To view the regulatory information on this device, do the following:
1. Open Bullitt Satellite Messenger Application.
2. On the Settings screen, select ‘Bluetooth devices’ > E-label Image.
CE SAR Compliance
This device meets the EU requirements (1999/519/EC) on the limitation of exposure
of the general public to electromagnetic fi elds by way of health protection.
The limits are part of extensive recommendations for the protection of the general public. These
recommendations have been developed and checked by independent scientifi c organizations through
regular and thorough evaluations of scientifi c studies. The unit of measurement for the European
Council’s recommended limit for mobile devices is the “Specifi c Absorption Rate” (SAR), and the
SAR limit is 2.0 W/kg averaged over 10 grams of tissue. It meets the requirements of the International
Commission on Non-Ionizing Radiation Protection (ICNIRP).
For body worn operation, this device has been tested and meets the ICNIRP exposure guidelines and
the European Standard EN 62209-2, for use with dedicated accessories. Use of other accessories which
contain metals may not ensure compliance with ICNIRP exposure guidelines.
SAR is measured with the device at a separation of 5 mm to the body, while transmitting at the highest
certifi ed output power level in all of the device’s frequency bands.
The highest reported SAR values under the CE regulatory for the device are listed below:
Body SAR: 1.432 W/kg, Limbs SAR: 2.261 W/kg.
To reduce exposure to RF energy the device must be carried 5mm from the body to ensure exposure
levels remain at or below the as-tested levels.