Motorola Defy Satellite Link - Manual (Page 10)

motorola defy satellite link
10
Cancelling an SOS
If you have accidentally sent an SOS message it is possible to cancel this by pressing and holding the
orange button on the side of the device, or through the Bullitt Satellite Messenger app.
Operating the satellite link without a Bluetooth connection
Following the initial pairing, linking, and account set up, the motorola defy satellite link can be used
without a connection to your phone (unpaired mode). The following features are supported in unpaired
mode when connected to the satellite:
• Sending check ins using the check-in button
You must fi rst defi ne the check in contact using the Bullitt Satellite Messenger app while the device is
paired to the phone. Check ins can be triggered every 90 seconds using the check in button. Check ins
will be blocked if you attempt to send multiple within 90 seconds of each other.
• Sending SOS requests using the SOS button
An SOS message can be sent from the device, but you need to use the Bullitt Satellite Messenger app to
exchange messages with the response centre. If you trigger an SOS in this situation, then the location of
your device will be sent to the response centre. It is recommended that you stay in this position as this is
where help will be sent.
• Receiving messages
The device will continue to receive messages while connected to the satellite. These will be shown in
the Bullitt Satellite Messenger app the next time you connect to your phone. The check in LED will fl ash
green once every 10 seconds to indicate that a message has been received in unpaired mode.
The device will continue to receive messages in unpaired mode until message buff er is full, indicated
by the power LED fl ashing orange. Please connect to the Bullitt Satellite Messenger app to allow the
messages to be transferred to your phone.
Message allowance
The number of messages that you can send and receive via satellite on a monthly basis will depend on
your subscription. In all cases the number of messages quoted is the maximum allowed. Depending on
the length of your messages your monthly total may be less than that quoted. You can monitor your
allocation through the
PROFILE menu.
Satellite coverage map
The Bullitt Satellite Connect service uses GEO stationary satellites. A map detailing the current
availability and coverage of these satellites can be found here
www.bullittsatelliteconnect.com/coverage
Please ensure that you study this before using your device.