Flickerless s.s. setting, Is mode, Flickerless s.s. setting is mode – FujiFilm X-S20 Mirrorless Camera with 18-55mm Lens (Black) User Manual
Page 202

176
6
T
he Shooting M
enus
FLICKERLESS S.S. SETTING
Select
ON
to allow shutter speed to be fi ne-tuned to reduce fl ick-
er caused by LED lighting and the like.
Options
Options
ON
OFF
N
This option takes eff ect only in modes
S
and
M
.
IS MODE
Reduce blur caused by camera shake or subject motion.
Option
Option
Description
Description
L
CONTINUOUS
+ MOTION
Image stabilization on. If
+ MOTION
is selected, the camera
will adjust shutter speed to reduce motion blur when mov-
ing objects are detected.
l
CONTINUOUS
M
SHOOTING
+ MOTION
As above, except that image stabilization is performed only
when the shutter button is pressed halfway (focus mode
k
only) or the shutter is released. If
+ MOTION
is selected,
the camera will adjust shutter speed to reduce motion blur
when moving objects are detected.
m
SHOOTING ONLY
OFF
Image stabilization off . Choose this option when using a
tripod.
N
•
+ MOTION
has no eff ect when sensitivity is set to a fi xed value, and
may also be unavailable at some other combinations of settings. The
eff ect may vary with lighting conditions and the speed at which the
object is moving.
•
The setting selected with the lens image stabilization switch, if any,
takes priority over the setting chosen with
IS MODE
.
•
Note that vibration or camera sounds may be noticeable as image
stabilization takes eff ect.