FujiFilm X-S20 Mirrorless Camera with 18-55mm Lens (Black) - Manual (Page 151)

125
5
T
a
k
ing Phot
og
raphs
Flash Photography
Flash Settings
The following settings are available with the built-in fl ash.
ADJUST END
MODE
Built-In Flash
Setting Setting Description Description
A Flash control mode
Choose from the following options:
•
TTL : TTL mode. Adjust fl ash compensation ( B ) and choose
a fl ash mode ( C ).
•
M : The fl ash fi res at the selected output ( B ) regardless of
subject brightness or camera settings. Output is expressed
in fractions of full power, from ⁄ to ⁄. The desired results
may not be achieved at low values if they exceed the limits
of the fl ash control system; take a test shot and check the
results.
•
C (primary fl ash) : Choose if the fl ash is being used as a pri-
mary fl ash controlling secondly fl ash units, for example as
part of a studio fl ash system.
•
D (OFF) : The fl ash does not fi re.
B Flash compensation/
output Adjust fl ash level. The options available vary with the fl ash
control mode (
A ).