Zoom Am7 Mid-Side Stereo Microphone for Android Devices with USB-C Connector - Manual (Page 2)

2
Part Names
Stereo mini jack USB Type-C connector
MS
stereo mic
(Mid)
MIC GAIN knob
Level indicator Case adjuster
MS
stereo mic
(Side)
Stereo width
switch
M-S stereo mic: This is a mid-side stereo
microphone. Turn to change its orientation. (See
”Changing the mic orientation.”)
Stereo mini jack: Connect headphones to
monitor recording and playback. This can also be
used as a line output jack.
Stereo width switch: Set the left-right spread of
the stereo mic. (See “Adjusting the stereo
width.”)
MIC GAIN knob: Use to adjust the recording
level manually. (See “Adjusting the recording
level.”)
Level indicator: The red LED lights dimly when
connection with the device is normal. The LEDs
also light according to the level of the input
signal.
(Red)
Higher than
−42 dB
Higher than
−12 dB
Higher than
–0.25 dB
USB Type-C connector: Connect to the USB
Type-C connector of the Android device.
Case adjuster: Remove this if the case of the
device prevents the USB Type-C connector from
connecting completely.
Connecting with the Device
1.
Connect the Am7 to the device with the USB
Type-C connector.
When the connected device is providing power to the
Am7, the red LED lights dimly.
The Am7 becomes ready for use when Handy Recorder
or another app that can use it is started.
• Remove the case adjuster if the
case of the device prevents the
USB Type-C connector from
connecting completely.
• Some cases might prevent
connection even when the case
adjuster is removed.