Charcoal filter, Fig. 4 fig. 5 changing the light bulb – Electrolux EFC 9418 User Manual

Page 7

Charcoal filter

The charcoal filter should only be used if you

want to use the hood in the recirculation

function.

To do this you will need an original charcoal

filter (available from your local Service Force

Centre).

This filter cannot be cleaned or reused.

As a general rule, the activated charcoal

filter should be changed once every four

months.

Fitting Fig. 4

Fit one charcoal filter on the left and one on the

right so to cover the plastic grids that protect the

fan wheel, then turn clockwise the central

handle of the charcoal filter.

To remove proceed in the reverse order.

Always specify the hood model code number

and serial number when ordering replacement

filters. This information is shown on the

registration plate located on the inside of the

unit.

The charcoal filter can be ordered from your

local Service Force Centre.

Fig. 4

Fig. 5

Changing the light bulb

Disconnect the cooker hood from the main

supply.

Remove the lamp cover, use a flat bladed screw

driver as a lever. Fig. 5.

Replace the old bulb with a new one of the

same type.

Refit the lamp cover.

If the light does not come on, make sure the

bulb has been inserted correctly before

contacting your local Service Force Centre.