Exmark Lazer Z Mower 4500-645 - Manual (Page 30)

Operation
1/4 inch (6.4 mm) clearance to the ground. Do
Not adjust the rollers to support the deck.
7. For LZZ-LP Units: Be sure the roller bolts are
installed with the spring disc washer between
the head of the bolt and the mounting bracket
(Figure 18).
For LZAS-LP Units: Be sure the whizlock nuts
are installed with the spring disc washer between
the head of the nut and the mounting bracket
(Figure 19).
Note: The foot operated deck lift assist lever
can be used to momentarily lift the deck to clear
objects. Be sure that PTO is disengaged.
• For LZZ-LP Units:
Torque the 3/8–24 x 2 Gr 8 hex capscrew to
50–55 ft-lb (68–75 N-m) (Figure 18).
Figure 18
1. Spring disc washer
(cone towards bolt head) 3. 3/8 nyloc-torque to 30-35
ft-lb (41-47 N-m)
2. Front right anti-scalp
bracket shown 4. 3/8-24 x 2 GR8 torque to
50-55 ft-lb (68-75 N-m)
• For LZAS-LP Units:
A. Torque the 3/8–16 whizlock nut to 30-35
ft-lb (41-47 N-m) (Figure 19).
B. Torque the 3/8 nyloc nut to 30–35 ft-lb
(41-47 N-m).
Figure 19
1. Spring disc washer
(cone towards nut ) 3. 3/8 nyloc-torque to 30-35
ft-lb (41-47 N-m)
2. Front right anti-scalp
bracket shown 4. 3/8-16 whizlock nut
torque to 30-35 ft-lb
(41-47 N-m)
Transporting
Transporting a Unit
Use a heavy-duty trailer or truck to transport the
machine. Lock brake and block wheels. Securely
fasten the machine to the trailer or truck with straps,
chains, cable, or ropes. Be sure that the trailer or truck
has all necessary lighting and marking as required by
law. Secure a trailer with a safety chain.
CAUTION
This unit does not have proper turn
signals, lights, reflective markings, or a
slow moving vehicle emblem. Driving on a
street or roadway without such equipment
is dangerous and can lead to accidents
causing personal injury. Driving on a street
or roadway without such equipment may also
be a violation of State laws and the operator
may be subject to traffic tickets and/or fines.
Do Not drive a unit on a public street or
roadway.
30