Exmark Lazer Z Mower 4500-645 - Manual (Page 19)

Specifications
Note: Motion control levers are adjustable to
two heights.
– Separate levers, on each side of the console,
control speed and direction of travel of the
respective drive wheels.
– Steering is controlled by varying the position
of the levers relative to each other.
– Moving motion control levers outward (in
slots) locks the drive system in neutral.
• PTO Engagement Switch: Engages electric clutch
(to drive belt) which engages mower blades.
• Parking Brake Lever: Engages parking brake.
• Parking Brake Release Button: Releases parking
brake.
• Deck Height Adjustment Lever: Sets cutting
height to desired position.
• Deck Lift Pedal: Foot pedal that lifts deck.
• Transport Lock:
– Latching position: Automatically latches at
the transport position.
– Unlatching position: Deck does not latch at
the transport position.
Seat
• Type:
– LZZ-LP Units: Standard seat with high back,
extra wide foam padded seat cushion with
internal suspension, thick bolstering, two-tone
cover, armrests, integral safety switch, and
seat vibration isolation system.
– LZAS-LP Units: Standard seat with high
back, extra wide foam padded seat cushion
with internal suspension, thick bolstering,
armrests, integral safety switch.
Optional seat accessories for units with standard
seats:
– Custom ride suspension system to enhance
Standard Seat. Adds approximately 3 inches
(7.6 cm) to seat height.
– Deluxe suspension seat with high back, low
profile foam-in-place cushion (dampened,
adjustable spring suspension), armrests, and
integral safety switch. Seat height remains the
same.
– Seat Isolation System for reduced vibration,
to enhance ride of standard seat, standard seat
with Custom Ride Seat Suspension or Deluxe
Suspension Seat. Adds approximately 1 inch
(2.5 cm) to seat height. Seat Isolation System
is standard on all LZZ-LP units.
• Mounting:
– LZZ-LP Units: Hinged seat frame to tilt up
seat. Held in tilted position with prop rod.
Adjustable fore and aft on seat tracks.
– LZAS-LP Units: Adjustable fore and aft on
seat tracks.
– Armrests:
◊ Standard seat: foam padded adjustable
flip-up armrests.
◊ Suspension seat: molded adjustable flip-up
armrests.
– Seat Safety Switch:
Integrated seat switch. Time delay seat switch
eliminates rough ground cut-outs.
Hydrostatic Ground Drive System
• Two unitized hydrostatic transmissions:
– LZZ-LP Units:
◊ 16cc Parker axial piston pump
◊ 280cc Ross geroler motor
– LZAS-LP Units:
◊ 12cc Parker axial piston pump
◊ 240cc Parker geroler motor
• Hydraulic Oil Type: Exmark Premium Hydro oil.
• Hydraulic Oil Capacity: 52 oz (1.5 L) per side
• Hydraulic Filter: P/N 116-0164
• Speeds:
– 12cc
◊ 0-10 mph (16.1 km/hr) forward.
◊ 0-5.5 mph (8.9 km/hr) reverse.
– 16cc
◊ 0-11.5 mph (18.5 km/hr) forward.
◊ 0-6 mph (9.7 km/hr) reverse.
• Drive wheel release valves allow machine to be
moved when engine is not running.
19