Electrolux 318 203 603 (0709) - Manual (Page 11)

11
Before Using the Cooktop
LED MESSAGES OR LIGHT INDICATORS DISPLAYED BY
MAIN CONTROL
CONTROLS LOCK - This feature allows the cooktop to be locked only when the
cooktop is switched to OFF. Touch and hold the LOCK key pad for a few seconds.
A beep will sound and dashes (“- -” / “-”) on all cooking zone controls will be
displayed (Fig. 1 and 2). Once locked, no other displays will glow and no Cooking
Zones will activate. To turn the Controls Lock OFF, touch and hold the LOCK key
pad for a few seconds. A beep will sound, the Lock dashes on all LED’s of zone
controls will turn OFF and the cooktop may be used normally.
COOKTOP POWER - The Cooktop POWER key pad activates the entire
Cooktop. To power the cooktop, touch and hold the POWER key pad for 2
seconds. A beep will sound and the Power LED will glow (See Fig. 4). The cooktop
will be in a ready mode for 20 seconds. If no other key pads are touched the
Cooktop Main POWER will turn OFF automatically. To turn the Main Power OFF
touch and hold the Main POWER key pad for 1 second. A beep will sound and the
Power Indicator Light will turn OFF (See Fig. 3).
ERROR CODES E XX - The control displays
EEEEE
(radiant/Induction zone controls) in
Cooking Zones LEDs (Fig. 5) and digits in Minute timer LED (Fig. 6) together
showing an error code.
Fig. 1 Fig. 2
Fig. 3 Fig. 4
Fig. 5 Fig. 6
POWER POWER
LIGHT INDICATORS DISPLAYED BY COOKING ELEMENT
CONTROLS
COOKING ZONE ON/OFF PAD - Each Cooking Elements have separate ON/OFF key
pads (Fig. 7). Once the Main Power key pad has been touched to activate the cooktop,
touch the corresponding Cooking Element ON/OFF key pad once to active the Cooking
Zone needed. “0
0000” or “0.0 0.0 0.0 0.0 0.0” will appear in the LED display. If the corresponding hi + (in-
crease) / - lo (decrease) key pad is not touched, the request to turn the Cooking Element
ON will cancel and the Cooktop Main Power will turn OFF, if no other zone is actived. To set
a Cooking Element power level touch the corresponding Cooking Element + (increase) or -
(decrease) key pad once. To turn OFF a Cooking Element, touch the Cooking Element ON/
OFF key pad once and the LED display will shows “0
0000” or “0.0 0.0 0.0 0.0 0.0” or will turn OFF if the
corresponding cooking element was activated more then 10 seconds.
Fig. 7
ON OFF