Echo POWER EDGER ATTACHMENT 99944200470 - Manual (Page 3)

P
OWER
E
DGER
A
TTACHMENT
O
PERATOR
'
S
M
ANUAL
3
S
AFETY
DECALS
Locate these safety decals on your unit. The complete unit illustration
found in the "DESCRIPTION" section, will help you locate them. Make
sure the decals are legible and that you understand and follow the
instructions on them. If a decal cannot be read, a new one can be
ordered from your ECHO Dealer. See PARTS ORDERING instructions
for specific information.
These decals are in English only:
M
ANUAL
S
AFETY
S
YMBOLS AND
I
MPORTANT
I
NFORMATION
Throughout this manual and on the product itself, you will find safety
alerts and helpful, information messages preceded by symbols or key
words. The following is an explanation of those symbols and key words
and what they mean to you.
This symbol accompanied by the words WARNING
and DANGER calls attention to an act or condition
that can lead to serious personal injury to operator
and bystanders.
IMPORTANT
NOTE
The circle with the slash symbol means whatever is shown
within the circle is prohibited.
IMPORTANT The enclosed message
provides information necessary for the
protection of the unit.
NOTE This enclosed message provides tips for
use, care and maintenance of the unit.
•WHEN USED IMPROPERLY, THIS EDGER COULD
CAUSE SERIOUS PERSONAL INJURY. READ AND
FOLLOW ALL SAFETY PRECAUTIONS IN THE
OWNER'S MANUAL. •NEVER OPERATE WITHOUT
EYE PROTECTION. ALWAYS INSPECT AREA FOR
HIDDEN OR THROWABLE OBJECTS. NEVER USE
IN GRAVEL. •STAY CLEAR OF ROTATING BLADE AT
ALL TIMES. KEEP BYSTANDERS AT LEAST 50 FEET
AWAY. •STOP ENGINE BEFORE ADJUSTING
CUTTING HEIGHT OR PERFORMING ANY SERVICE.
•NEVER OPERATE WITH UNIT POSITIONED ON
LEFT SIDE OF THE BODY. •USE ONLY ECHO
APPROVED REPLACEMENT BLADES ON THIS UNIT.
•DO NOT USE EDGER BLADE ON ANY BRUSH
CUTTER. •EDGER ATTACHMENT AND BLADE ARE
INTENDED FOR EDGING ONLY. •AFTER
REPLACING OR SERVICING BLADE, ARBORS,
NUT AND COTTER PIN MUST BE USED PROPERLY.
WARNING DANGER
Shaft Decal
Shaft Decal
P/N 89016025560
P/N 89016052631