EverFocus NEV10 EZN850 - Manual (Page 55)

EZN850
55
Save/Load Configuration Server
To take a backup of all of the configurations, press Save to save all configurations
to a config. file. If necessary, it is then possible to return to the previous settings if
the settings are changed and there is unexpected behavior.
Press the Browse button to locate the saved config. file (see above) and then click
the Load button. The settings will be restored to the previous configuration.
Upgrade Firmware
Upgrade the EZN850 with the latest firmware.
Press Browse button to search firmware file. Press Upgrade button to upgrade the
firmware.
Note
1. Do not disconnect power to the unit during the upgrade. The unit reboots
automatically after the upgrade has completed. (1-5 minutes.)
2. During upgrading process, all event recording actions will be stopped. It
will continue to record after the camera is rebooted.