EverFocus NEV10 EZN850 - Manual (Page 43)

EZN850
43
5. Check “Enable Pre-alarm Buffer” and “Enable Post-alarm Buffer”. For pre-and
post alarm buffer setting, please refer to “4.6.3 Alarm”.
6. Check “Enable This Event”.
7. Select “Always” for time mask. For detail about Time Mask, please refer to
“4.6.4 Time Mask”.
8. Click to save this event in event list.
4.6.2 Motion
Motion Detection
User can define the motion area to be detected by left clicking the mouse to draw
lines. Every click is an end point of the line. When the detection area is formed,
double click the mouse to have all the lines connected. To remove the selection,
simply right click the mouse, the selected polygon will be deleted.
Steps for setting motion detection areas:
1. Motion Detection video is not a moving video. For getting the most update
picture, press to update the current image.