EverFocus NEV10 EZN850 - Manual (Page 33)

EZN850
33
z Please select the area you would like to detect from the 4 areas in AREA SEL
mode.
z Please select ON mode for the chosen area.
z Please click UP (c) or DOWN (d) key to move between TOP, DOWN, LEFT
and RIGHT for adjusting the size of the area.
z Please click LEFT (e) or RIGHT (f) key to adjust the value for size of the
area.
z Additionally, it is possible to change the position of the area. Please refer to
the following example for detailed steps on moving AREA1 to center.
1. The original position of AREA1 was TOP: 10, DOWN: 25, LEFT: 20 and RIGHT:
40.
MOTION DETECTION
> AEREA SEL AREA1
AREA STATE ON
TOP |+++++++++| 10
DOWN |+++++++++| 25
LEFT |+++++++++| 20
RIGHT |+++++++++| 40
Press SET to return
SPECIAL
CAMERA ID OFF
COLOR ADJ.
<┘
SYNC. INT
> MOTIION DET ON <┘
PRIVACY OFF
MIRROR OFF
SHARPNESS ON
<┘
RESET
RETURN <┘
AREA1 AREA2
AREA3 AREA4
AREA1