FujiFilm MKX18-55mm T2.9 Lens (Fuji X-Mount) - Manual (Page 17)

EN-7 ENGLISH
Attaching the Lens to the Camera
E Example X Example 1 Remove the body cap from the camera and the
rear cap from the lens.
2 Place the lens on the mount, keeping the lens in-
dex (
E ) or mounting mark ( X ) aligned with the
mounting mark on the camera body.
Q Note that in some cases there may not be a mount-
ing mark on the camera body (
E only).
• When attaching lenses, ensure that dust or other foreign matter does not enter the camera.
• Be careful not to touch the camera’s internal parts.
• Rotate the lens until it clicks into place.
• Do not press the lens release button while attaching the lens.
Q Before using the lens for the fi rst time or after attaching it to a diff erent camera, measure the fl ange-back
distance (
P EN-9).
Q The procedure for attaching the lens may diff er depending on the camera.
The Lens Hood
E X Example
Hood mounting mark
Hood lock knob
■ Attaching the Hood
• Loosen the hood lock knob by rotating it counter-
clockwise.
• Slide the hood onto the lens until it contacts the
raised ridge.
• Rotate the hood to align the lock knob with the
hood mounting mark on the lens.
• Tighten the lock knob.
■ Removing the Hood
• Loosen the hood lock knob by rotating it counter-
clockwise.
• Slide the hood straight forward off the lens.
Hoods for diff erent lenses have diff erent
shapes. Be sure to use the correct hood.
Q Use the lens hood cap with the lens hood.
Q Using the wrong hood may cause vignett-
ing or other undesired results.
E MK 18-55 mm
X MKX 18-55 mm
E MK 50-135 mm
X MKX 50-135 mm