Ez debug led – MSI B650 GAMING PLUS WIFI AM5 ATX Motherboard User Manual

Page 47

⚠

CAUTION

Do not connect the wrong type of LED strips. The JRGB connector and the JARGB_V2

connector provide different voltages, and connecting the ARGB 5V LED strip to the

JRGB connector will result in damage to the LED strip.

⚠

Important

∙

If you connect the ARGB Gen1 and ARGB Gen2 LED strips into the same connector, it

may cause some issues. Please do not mix the ARGB Gen1 LED and the ARGB Gen2

LED strips together.

∙

It is recommended that you install LED strips with the same specification to achieve

the best effects.

∙

Always turn off the power supply and unplug the power cord from the power outlet

before installing or removing the addressable RGB LED strip.

∙

Please use MSI’s software to control the extended LED strip.

EZ Debug LED

These LEDs indicate the debug status of the motherboard.

LED Color

Status

Red

CPU is not detected or fail

Yellow

DRAM is not detected or fail

White

GPU is not detected or fail

Green

Booting device is not detected or fail