EverFocus EAN-1350 - Manual (Page 50)

EAN-1350 Installation / Operation
50 of 59
6.4 FACTORY DEFAULT
This menu allows to load factory default values and backup / restore camera settings.
Factory Default
Setting
Resets all settings,
except IP - parameters
All values will be set to factory defaults except the basic
settings for IP parameters.
Resets all parameters All parameters incl. IP settings are set to factory default
values.
Backup all parameters Saves the current camera settings in a configuration file.
Confirm to save the file.
Restore all parameters Loade a camera configuration.
Search Enter the file path to the EAN1350 configuration file.
Submit Send the selected configuration file to the camera
Reset Delete the file path to the configuration file