EverFocus EAN-1350 - Manual (Page 48)

EAN-1350 Installation / Operation
48 of 59
6.2 MOTION DETECTION
The EAN-1350 offers motion detection in 3 independent zones. Zone 3 can be defined
as "Exclusive" zone, no motion will be detected.
Setup of "EXCLUSIVE" zone:
Motion detection
Setting
Area 1 ~ 3 Set the checkbox to enable the motion detection zone.
Click on "AREA1(2,3)" to show the detection area. Click in der
middle of the zone to move the area, click at the borders to
change area size.
Detect level Detection sensitivity setup, 5 steps available.
Area3 >
EXCLUSIVE
Activate the "EXCLUSIVE" checkbox for zone 3 to set this zone to
"No Detection" mode. This function is useful to cover areas in
other detection zones, where false alarms are expected (e.g.
moving trees)