Electrolux 318 205 122 - Manual (Page 30)

30
Electronic Control Settings
USER PREFERENCES
(CONTINUED)
Changing between 12 or 24 hour time of day display:
1. Press USER PREF until you get to the CLO 12hr menu page.
2 Press
-
lo
or +
hi
to toggle the display of the clock in 12 or 24 hours.
3. Press START to accept the changes and go back to user preferences menu display.
4. Remember to set your clock after changing the time of day display mode.
SETTING TIME OF DAY DISPLAY — 12 OR 24 HOURS
The oven control can be programmed to display time of day in 12 hours or 24 hours mode.
The oven has been preset at the factory to display in 12 hours mode.
Changing clock display between ON and OFF:
1. Press USER PREF until you get to the CLO on menu page.
2. Press
-
lo
or +
hi
to toggle between displaying or hiding the clock.
3. Press START to accept the changes and go back to user preferences menu display.
SETTING CLOCK DISPLAY — ON OR OFF
The oven control can be programmed to display the time of day or not. The oven has been
preset at the factory to display the time of day.
ADJUSTING OVEN TEMPERATURE
The temperature in the oven has been pre-set at the factory. When first using the oven, be sure
to follow recipe times and temperatures. If you think the oven is too hot or too cool, the
temperature in the oven can be adjusted. Before adjusting, test a recipe by using a temperature
setting that is higher or lower than the recommended temperature. The baking results should
help you to decide how much of an adjustment is needed. Each oven can be individually adjusted.
To adjust the oven temperature:
1. Press USER PREFERENCES until you get to the UPO menu page.
2. If youwant to adjust the temperature in the lower oven, press USER PREFERENCES
again. UPO will appear in the lower display.
3. Enter the temperature by pressing the
+
hi
or
-
lo
pads. The temperature can only be
adjusted by ± 35°F.
4. Press START to accept the changes and go back to user preferences menu display.