beautypg.com

Getting started, Oven light, Control lock – Electrolux 318 205 122 User Manual

Page 13: Setting the kitchen timer

background image

13

Getting Started

OVEN LIGHT

Your appliance includes “theater” style oven lighting feature that gradually lights both the upper
and lower oven interiors to full brightness. Each oven is equipped with 2 halogen lights. The oven
lights will turn on automatically when the oven door is opened. The oven light may be turned on
when the door is closed by using the oven light pad located on the control panel. The oven light
key will toggle the lights in both ovens at the same time.

To toggle the Oven Lights ON and OFF:

1.

Press OVEN LIGHT

.

CONTROL LOCK

The Control Lock feature automatically locks the oven door and the control panel. The Control
Lock is only allowed when the oven is turned OFF (not active). The Control Lock feature will lock
both oven at the same time. DOOR LOCK will flash in the display for 20 seconds or until the door
has finished locking. Once the door has been locked, DOOR LOCK will remain static. Do not
attempt to open to oven door while DOOR LOCK is flashing.

To toggle the Control Lock ON and OFF:

1.

Keep CONTROL LOCK

pressed for 3 seconds.

SETTING THE KITCHEN TIMER

This unit is equipped with 2 Kitchen Timers which serves as extra timers in the kitchen that will
beep when the set time has run out. It does not start or stop cooking. The Timer feature can be
used during any of the other oven control functions and cooking modes.

To set the Timer (example for 5 minutes):

1.

Press TIMER

. "00:00" will appear in the display.

2.

Press

5

pad to set the timer to 5 minutes. The pads

+

hi

or

-

lo

can also be pressed to raise

or lower the actual time displayed.

3.

Press again TIMER

to accept and start the countdown.

4.

When the set time has run out, "00:00" will be displayed and the TIMER

pad will flash.

The clock will sound a chime that will be repeated at regular intervals until the TIMER

pad is pressed.

To cancel the Timer before the set time has run out:

Press TIMER

. The display will return to the time of day.