EnGenius Technologies EPI-3601S - Manual (Page 15)

EPI-3601S Wireless LAN PCI adapter Version 1.2
15
b. If the router does not support [DHCP] function, you have to configure the IP
and DNS settings.
8 Setup WLAN (EnGenius Client Utility)
Prerequisite:
1. Your home/office environment should have a wireless LAN Access Point
(AP) that is available for your use.
2. You should readily have the (security keys) to connect those Wireless LAN
Access Points (AP)
EnGenius Client utility will first automatically link with any Wireless AP if there is no
security key required. If the connection is successful, a message will appear on
taskbar.
Following steps guides you to initially setup a wireless network connection.
If in case any non secure WLAN access point was found by EnGenius Client Utility, it
will have already connected to that AP. Notice the EnGenius Client Utility on taskbar
shows connected icon.
Hovering the mouse cursor briefly over EnGenius Utility icon will show status as
follows…the current status indicates that Config utility has automatically connected
to an Access Point named ICN_DLINK_WIFI. Other details about the connection
are shown.
Click open EnGenius Client Utility from start menu.