Epson EMP Monitor - Manual (Page 8)

7 Main EMP Monitor window
The main window shows the status information for each projector. To carry
our operations for projectors, select the projectors from the projector list and
then click the buttons.
To close the window, click the in the top-right corner.
Button functions
The power can be turned on or off and the image source can be changed for
the projectors that are selected from the projector list. The same operations
can also be carried out using the commands in the [Tools] menu.
Buttons
Projector list
Detail display Shows detailed information for the selected projectors.
Power ON Turns the projector power on.
Power OFF Turns the projector power off.
PC1,
InputA Switches to the images source connected to the
[Computer] port, [Computer1] port or [InputA] port.
PC2,
InputB Switches to the images source connected to the
[Computer 2] port or [InputB] port.
BNC Switches the input source to the [BNC] port.
S-Video Switches the input source to the [S-Video] port.
Video Switches the input source to the [Video] port.
D4 Switches the input source to the [D4] port.
DVI,
HDMI Switches to the images source connected to the [DVI]
port or [HDMI] port.
EasyMP Switches to EasyMP or EasyMP.net.
TIP
Some connected projectors may not be equipped with all of the above
ports or functions. If you click a button for a port or function that is
not available, nothing will happen.