Epson EMP Monitor - Manual (Page 6)

5 Registering projectors for monitoring
Registration using automatic detection
PROCEDURE
Click [Auto detect] in the [Register projector]
dialogue box.
Select the projector(s) to be registered, and then click
[Add].
You can select several projectors at the same time.
If a projector does not appear in the list, use "Registration using
IP address (Manual registration)".
p.6
Click [Close] to return to the main EMP Monitor
window.
Refer to "Main EMP Monitor window" for details on using the
main window.
p.7
1
2
TIP
• Projectors that have been registered using automatic detection will be
re-detected on the basis of projector name and the IP addresses for
these projectors will be displayed each time EMP Monitor is started.
• If a password entry screen is displayed, enter the password for the
projector's Administrator and then click [OK].
If more than one projector was selected, the password entry screens
for each projector will be displayed in succession.
3