Epson Stylus Parts CX5800F - Manual (Page 8)

Epson Stylus CX5800F
8 8/05
Note:
If you need to cancel the number of copies selected, press the
y Cancel/Back button. To exit Copy mode, press the y Cancel/
Back button again.
7. Press the paper type button to select Plain Paper . The light
indicates which type is selected.
8. Press the paper size button to select Letter .
9. To make a color copy, press the x Start Color button.
To make a black and white copy, press the x Start B&W
button.
Printing appears on the display and the Epson Stylus
CX5800F starts copying.
If you need to stop copying, press the y Cancel/Back button.
Do not pull out paper that is being printed; it will be ejected
automatically to the output tray.
Note:
The copies may not be exactly the same size as the original.
Copying a Photo
1. Press the P On button to turn
on the Epson Stylus CX5800F.
You see a screen like this:
2. Place the photo on the glass as described on page 7. Be sure
to close the document cover.
3. Load up to 20 sheets of letter-size, 4 × 6-inch, or 5 × 7-inch
photo paper. See page 4 for details.
4. Press the Copy button. You see
this display:
5. If you want borderless photos
(printed without a white
border), press the
Copy button
again to select Fit to Page
mode. (If you select 100% ,
photos are printed with a
0.12-inch [3 mm] border.) The
display changes to this:
6. To make multiple copies (up to 99), press the number keys
on the numeric keypad. The display shows the number you
select.
Note:
If you need to cancel the number of copies selected, press the
y Cancel/Back button. To exit Copy mode, press the y Cancel/
Back button again.
7. Press the paper type button to select Photo Paper .
8. Press the paper size button to select Letter , 4”x 6” , or
5”x 7” .
9. To make a color copy, press the x Start Color button.
To make a black and white copy, press the x Start B&W
button.
Printing appears on the display and the Epson Stylus
CX5800F starts copying.
If you need to stop copying, just press the y Cancel/Back
button. Do not pull out paper that is being printed; it will be
ejected automatically to the output tray.
Note:
The copies may not be exactly the same size as the original.
When making a lot of copies, it is a good idea to remove the printed
copies from the output tray after every 10 sheets or so.
Speeding Up Copying
If you want to make a copy quickly and do not need high
quality, you can print a “draft” copy. The print quality is
reduced, but the copy is printed faster.
1. Load plain, letter-size paper.
2. Press the Copy button. You see
this display:
3. Press the paper type button to select Plain Paper .
4. Press the paper size button to select Letter .
5. Hold down the y Cancel/Back button, then press the
x Start Color button (to copy in color) or the x Start
B&W button (to copy in black and white). When Color
Draft Mode or B/W Draft Mode appears on the display,
release both buttons.
Printing From a Memory Card
Inserting the Card
1. Make sure the Epson Stylus CX5800F is turned on.
Note:
When you print directly from a memory card, it is best if the
Epson Stylus CX5800F is not connected to your computer (or
your computer is turned off).
2. Open the memory card door.
12:00 PM Y
Copies:1 100%
Copies:1 FitPage
Copies:1 100%