JBL CSA2120 2-Channel Installed Sound Power Amplifier - Manual (Page 16)

16
Installation
CAUTION: Before you begin, make sure that the amplifier is disconnected from
the power source and all level controls are turned completely down (counter-
clockwise).
1. If you need to mount the transformer module to rack, use a standard 19-inch
(48.3-cm) equipment rack (EIA RS-310B) . You can have the following options
according to your application:
• Rack mounting the transformer module with a CSA-2120 amplifier
• Rack mounting single unit
• Wall mounting
2. Connect the input of the transformer module to the output of the CSA-2120
amplifier with the shipped 4-pin cable.
3. Determine the proper transformer module tap to use, based on the desired
constant-voltage of your system.
CST-2120 Connection