Electrolux EWN 13570 W - Manual (Page 36)

36 electrolux installation
Installation
Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
1. After removing all the packaging,
carefully lay machine on it’s back to
remove the polystyrene base from the
bottom.
2. Remove the power supply cable and
the draining hose from the hose
holders on the rear of the appliance.
3. With a suitable spanner unscrew and
remove the central rear bolt A.
HEC0001
HEC0008
4. Unscrew and remove the two large
rear bolts B and the six smaller bolts
C.
5. Remove the bracket D and refit the
six smaller bolts C and slide out the
relevant plastic spacer E.
C
C
HEC0023
E
HEC0011S
D
HEC0003S
C
C
B
B
A
HEC00022
132972120 EN.qxd 26/10/2007 11.28 Pagina 36