Electrolux EWN 13570 W - Manual (Page 13)

use electrolux 13
Selecting the delayed start.
• Select the programme and the
required options.
• Select the delay start.
• Press the Start/Pause button: the
machine starts its hourly countdown.
The programme will start after the
selected delay has expired.
Cancelling the delayed start
• Press the Start/Pause button.
• Press the Delay Start button once
until the symbol 0’ is displayed.
• Press the Start/Pause button again.
The Delay Start cannot be selected
with Drain
programme.
Display
The display shows the following
information:
Duration of the selected programme
After selecting a programme, the
duration is displayed in hours and
minutes (for example
2.05 ).
The duration is calculated automatically
on the basis of the maximum
recommended load for each type of
fabric.
After the programme has started, the
time remaining is updated every minute.
Washing programme phase icons
By selecting the wash programme, all
the washing programme phase icons
corresponding to the various phases
making up the programme are shown in
the upper part of the display.
2.05
After the machine has started, only the
running icon stays on. When the
programme has finished, a flashing
zero (
0.00 ) is displayed.
Delay
The selected delay (20 hours max) set
by pressing the relevant button
appears on the display for about 3
seconds, then the duration of the
previously selected programme is
displayed.
The delay time value decreases by one
unit every hour and then, when 1 hour
remains, the time decreases every
minute.
Incorrect option selection
If an option which is not compatible with
the set wash programme is selected,
the message Err is displayed for about
2 seconds and the red Start/Pause light
start flashing.
132972120 EN.qxd 26/10/2007 11.28 Pagina 13