Electrolux HE 3160 User Manual

Page 19

Draw a line with a pencil on the middle of the internal side of the

furnituture door. Fig. 14.

Fit the visor upon the internal side of the furniture door so that the

line previously marked on it, is visible through the two triangles

holes located on the mid upper and lower side of the visor, having

care to respect the distance from the visor to the higher edge of the

furniture door as for the reason mentioned above in Fig. 12.

Fasten the visor to the furniture door through the 8 screws L 4,5x13

mm supplied. Fig. 14.

Replace the complete visor assembly into the extractor hood, first

inserting it on its upper, then on its lower guides.

Turn the rear unlocking knobs H so to avoid the visor take off. Fig.

13.

Refit the grease filters.

Fig. 13

Fig. 14