Philips X-Line 55BDL4007X 55" Full HD Video Wall Display - Manual (Page 32)

55BDL4005X/55BDL4007X
21
Format and edges
• { Picture format }: Change the picture format.
• { Zoom }: Expand the horizontal and vertical sizes of
the image simultaneously.
• { H Zoom }: Expand the horizontal size of the image
only.
• { V Zoom }: Expand the vertical size of the image only.
Note: Zoom, H Zoom and V Zoom are available only when
the Picture format setting is set to Custom Zoom.
See page 16 for the descriptions about Picture format .
HDMI input range
Color range of HDMI video format
• { Auto }: Automatic color range of HDMI video format.
• { Limit }: Limited range of HDMI video format.
• { Full }: Full range of HDMI video format.
Picture reset
Reset all your picture settings to the factory defaults.
5.1.2. Sound
Sound style
Bass
Treble
Balance
Volume
Minimum volume
Maximum volume
Surround mode
Audio out (line out)
Advanced
Sync. Volume
Sound reset Picture
Sound
Tiling
Network
General settings
Advanced
Help
Sound style
Access predefined sound settings.
Bass
Adjust to increase or decrease lower-pitched sounds.
Treble
Adjust to increase or decrease higher-pitched sounds.
Balance
Adjust to emphasize left or right audio output balance.
Volume
Adjust to increase or decrease the volume.
Minimum volume
Set the Minimum volume.
Maximum volume
Set the Maximum volume.
Surround mode
Set surround effects for audio performance.
Audio out (line out)
Adjust audio output volume.
Advanced
Access advanced settings to enhance your audio
experience.
• { Auto volume leveling }: Enable the reduction of
sudden volume changes.
• { Speaker settings }: Turn on or off the internal
speakers.
• { Clear sound }: Enhance sound quality.
• { Audio out format }: Choose the type of audio output
through the digital audio output connector. (HDMI
only)
• { Audio out delay }: Automatically synchronize the
image on this display to the audio from a connected
home theatre.
• { Audio out offset }: Adjust the setting for audio output
delay. Available if { Audio out delay } is switched on.
Sync. Volume
Enable or disable the Sync. Volume function. Set {On} to
synchronize the volume of internal speaker and line-out.
Set {Off} to adjust the volume of internal speaker and line-
out, respectively.
Sound reset
Reset to default setting.
5.1.3. Tiling
Enable
H monitors
V monitors
Position
Frame comp.
Frame comp. H
Frame comp. V
Switch on delay
RS232-Routing
Auto ID
Tiling tool Picture
Sound
Tiling
Network
General settings
Advanced
Help
Create a single large-screen matrix (video wall) that consists
of up to 100 sets of display (
up to 10-sets on the vertical
and 10-sets on the horizontal sides ).
Enable
Enable or disable the Tiling function. If {On} is selected, the
display will apply the settings in {
H monitors }, { V monitors },
{ Position }, and { Frame comp. }.
H monitors
Adjust the displays on the horizontal side.
V monitors
Adjust the displays on the vertical side.
Position
Adjust the position of this display in the screen matrix.