Philips X-Line 55BDL4007X 55" Full HD Video Wall Display - Manual (Page 31)

55BDL4005X/55BDL4007X
20
5. Change your settings
Using the remote control:
1. Press [ ] button on the remote control to display the
OSD menu.
2. Press [ ] or [ ] button to choose the item to be
adjusted.
3. Press [ OK ] or [ ] button to enter the submenu.
4. In the submenu, press [ ] or [ ] button to toggle
between items, press [ ] or [ ] button to adjust
settings. If there is a submenu, press [ OK ] or [ ] button
to enter the submenu.
5. Press [ ] button to return to the previous menu, or
press [ ] button to exit from the OSD menu.
Using the display’s control buttons
1. Press [ ] button to display the OSD menu.
2. Press [ ] [ ] [ ] or [ ] button to choose a menu item
or adjust its value.
3. Press [ ] button to confirm menu selection and
enter its submenu.
4. Press [ ] button to exit from the OSD menu.
5.1. Settings
Press [ ] HOME button.
5.1.1. Picture
m e n u
Picture style
Backlight
Colour
Sharpness
Noise reduction
MPEG artifact reducti...
Picture enhancement
Advanced
Scan mode
Format and edges
HDMI input range
Picture reset Picture
Sound
Tiling
Network
General settings
Advanced
Help
Picture style
Choose a predefined picture setting.
Backlight
Adjust the brightness of this display’s backlight.
Colour
Adjust the colour saturation of the picture.
Sharpness
Adjust the sharpness of the picture.
Noise reduction
Choose the amount of noise reduction for the picture.
MPEG artifact reduction
Smoothen transitions and haziness in the digital picture.
Picture enhancement
Fine-tune each pixel to match surrounding pixels and
produce a brilliant, high-definition image.
• { Advanced sharpness }: Enable superior sharpness,
especially on lines and contours of the picture.
• { Dynamic contrast }: Dynamically enhance the details
in the dark, medium and light areas of the picture.
• { Colour enhancement }: Dynamically enhance the
vividness and details of colours.
Advanced
Access advanced settings such as gamma, tint, video
contrast and so on.
• { Gamma }: Adjust the non-linear setting for picture
luminance and contrast.
• { Tint }: Change the colour balance.
• { Custom tint }: Customise colour balance setting. Only
available if { Tint }  { Custom } is chosen.
• { Video contrast }: Adjust video contrast.
• { Brightness }: Adjust screen brightness.
• { Hue }: Adjust screen hue.
Scan mode
Change the display area of the image.